If you ever get a flat tire, there are several steps that you can take to fix it. First of all, you should pull over in a safe location and put on your hazard lights. You will then need to find the jack and spare tire in your car’s trunk or under the front passenger seat. Once you have found them, set out a blanket on the ground so that when you change the tire, no dirt gets into your engine compartment. You will also need to loosen up all four lug nuts with an impact wrench until they come off completely from their bolts. Learn information about Fort Lauderdale, FL.
Now place the jack underneath your vehicle at one of its jacking points (usually near either end). Make sure it is stable before starting to lift! Once the car is elevated, you will need to remove all of your lug nuts with a wrench and take off the flat tire. You can then place the spare on its designated bolt holes and tighten up each nut snugly using your fingers before lowering your vehicle back down onto its wheels with a jack. Once it’s at an appropriate height again, make sure that they are tightened completely. Discover facts about What You Need to Know About Car Repairs.